Co-generation heat-power plant with with a gas-piston engine MWM TCG2032 V16. Electric power 4300 kW. The genset works with natural gas, biogas, landill gas and other gases. The gen set us used for a quick start. Available with the fast ramp-up software. This option allows to switch between the normal and the fast start requirement. Frequency responce is 2 seconds. Frequenсy control demand is 2 min. A fast start is a start in less than five minutes from the start request to 100% load. The series features superb reliability and low operating and maintenance costs. The plant has very high electric efficincy 44,3%. Available voltages 10.5 kV

High Efficiency and Low Lubricant Consumption

• High fuel utilization and low operation costs thanks to optimized chamber spark plug
• Increased efficiency through new closed crankcase ventilation that enables utilization of the blow-by gas
• High availability through long maintenance intervals: first maintenance after 4,000 h, major overhaul after 80,000 h
• With its lubricant consumption of only 0.2 g/kWh up to 30 percent lower lubricant consumption compared to competitor products thanks to optimized tappet sealing, coke stripping rings and ring packages

Soot-Free Combustion Increases Plant Profitability

• Open combustion chamber with chamber spark plug for soot-free combustion
• Extended maintenance intervals for the exhaust gas heat exchanger
• No pre-combustion chamber with time-consuming maintenance and risk of failure
• No additional gas supply with increased gas pressure required for pre-combustion chamber

Few Interruptions Due to Long Maintenance Intervals

• No more than two interruptions a year due to scheduled maintenance
• Longest interval until major overhaul compared to competitors
• Use of Xchange components enables time savings of up to 75 percent during the major overhaul, resulting in reduced costs

New Turbocharger Technology Increases Genset Availability

• Improved output under non-ISO conditions
• High output of 4,300 kW_el possible through use of A140 high-pressure turbocharger
• Turbocharger achieves higher compression ratio and enables operation under full load with intake air of up to 45°C
• Exhaust gas waste gate enables constant performance with different intake air temperatures and setup altitudes
• Evening out of reserve boost pressure in relation to load results in higher efficiency and improved load response

Compact Engine Design for Easy Transport and Installation

• Extremely lean genset with compact dimensions, low noise emissions, and smooth running guarantees minimum installation costs
• Compared to competitors, the specific output/weight ratio is up to 40 percent better
• Lighter engine components eliminate need for strong crane
• Compared to competitors, TCG 2032 V16 is up to 30 percent shorter in length
• Low weight and compact dimensions enable easy transport even to remote destinations

MWM is made in Germany. 

New

3 units are in stock