Biogas blower 2000 m³/h at 220 mbar
€ 27.500,00
Gases and purpose
The blower is designed for dust-free biogas and air.
Blower applications
Transfer of large biogas volumes from gas storage through gas treatment to consumers. Used as a booster to overcome pressure losses in long pipelines, bends and gas-treatment equipment.
Technical specifications
Features
Complete set
| Parameter | Operating point |
|---|---|
| Operating frequency, Hz | 60 |
| Flow, m³/h | 2000 |
| Static pressure increase, mbar | 219.99 |
| Inlet gas density, kg/m³ | 1.13 |
| Motor power, kW | 37 |
| Blower speed, rpm | 3162 |
| Frequency-control range, Hz | 30–60 |
| Sound pressure at 1 m, dB(A) | 87 |
| Blower weight without motor, kg | 290 |
| Motor protection / insulation class | B5 / IP55 / F/B |
| Blower ATEX rating | II 2G / 3G c IIA T1 |
| Motor ATEX marking | EEx nA II T3 |
Flow and static pressure are shown together for the stated operating point and inlet gas density. These are not separate maximum values. At the same flow and speed, pressure changes approximately in proportion to gas density.
Technical specifications
| Parameter | Operating point |
|---|---|
| Operating frequency, Hz | 60 |
| Flow, m³/h | 2000 |
| Static pressure increase, mbar | 219.99 |
| Inlet gas density, kg/m³ | 1.13 |
| Motor power, kW | 37 |
| Blower speed, rpm | 3162 |
| Frequency-control range, Hz | 30–60 |
| Sound pressure at 1 m, dB(A) | 87 |
| Blower weight without motor, kg | 290 |
| Motor protection / insulation class | B5 / IP55 / F/B |
| Blower ATEX rating | II 2G / 3G c IIA T1 |
| Motor ATEX marking | EEx nA II T3 |
Flow and static pressure are shown together for the stated operating point and inlet gas density. These are not separate maximum values. At the same flow and speed, pressure changes approximately in proportion to gas density.