Blower E-12-TS — 37 kW, 1700 m³/h at 150 mbar
€ 13.250,00
Gases and purpose
The blower supplies and increases the pressure of biogas, biomethane, landfill gas, sewage gas, natural gas, air, CO₂ and synthesis gas.
Blower applications
Transfer of large volumes of biogas and biomethane between gas storage, gas treatment and consumers. Used where high flow is required at a low or moderate pressure increase.
Technical specifications
Features
| Parameter | 50 Hz | 60 Hz |
|---|---|---|
| Maximum flow, m³/h | 2006 | 2385 |
| Maximum gauge pressure, mbar | 425 | 350 |
| Motor power, kW | 37 | 37 |
| Sound level at 1 m, dB(A) | 90 | 94 |
| Weight without motor, GOR / GVR, kg | 144 / 131 | 144 / 131 |
| Motor | Two-pole, IEC | Two-pole, IEC |
| Blower ATEX rating | II 3GD T3 | II 3GD T3 |
| Flexible coupling ATEX rating | II 2GD | II 2GD |
| Gauge pressure, mbar | Flow at 50 Hz, m³/h | Flow at 60 Hz, m³/h |
|---|---|---|
| 50 | 1900 | 2280 |
| 70 | 1860 | 2240 |
| 150 | 1700 | 2090 |
| 200 | 1590 | 2000 |
| 250 | 1490 | 1910 |
| 300 | 1390 | 1820 |
| 350 | 1290 | 1730 |
Flow rates at the stated pressures refer to air at 20 °C and an absolute inlet pressure of 1013 mbar. They can be used as indicative values for biogas of similar density. For methane, at the same volumetric flow and speed, the pressure difference is lower, approximately in proportion to the methane-to-air density ratio under the same inlet conditions.
Technical specifications
| Parameter | 50 Hz | 60 Hz |
|---|---|---|
| Maximum flow, m³/h | 2006 | 2385 |
| Maximum gauge pressure, mbar | 425 | 350 |
| Motor power, kW | 37 | 37 |
| Sound level at 1 m, dB(A) | 90 | 94 |
| Weight without motor, GOR / GVR, kg | 144 / 131 | 144 / 131 |
| Motor | Two-pole, IEC | Two-pole, IEC |
| Blower ATEX rating | II 3GD T3 | II 3GD T3 |
| Flexible coupling ATEX rating | II 2GD | II 2GD |
| Gauge pressure, mbar | Flow at 50 Hz, m³/h | Flow at 60 Hz, m³/h |
|---|---|---|
| 50 | 1900 | 2280 |
| 70 | 1860 | 2240 |
| 150 | 1700 | 2090 |
| 200 | 1590 | 2000 |
| 250 | 1490 | 1910 |
| 300 | 1390 | 1820 |
| 350 | 1290 | 1730 |
Flow rates at the stated pressures refer to air at 20 °C and an absolute inlet pressure of 1013 mbar. They can be used as indicative values for biogas of similar density. For methane, at the same volumetric flow and speed, the pressure difference is lower, approximately in proportion to the methane-to-air density ratio under the same inlet conditions.