Biogas analyzer SSM 6000 Classic for hot region
37 500 EUR
Multi-channel measuring instrument for biogas, landfill gas, biomethane with built-in gas processing, for use in hot climates (+50 °C). The gas analyzer can control up to eight measuring points and the analysis is fully automatic and can be carried out at variable time intervals. It features a data storage with a history function that records the specific time for all measured values.
The gas analyzer can be installed outdoors in a special housing as well as indoors.
Technical Details
Features
Measuring ranges:
CH₄: 0 to 100 Vol.%, CO₂: 0 to 100 Vol.%, O₂: 0 to 25 Vol.%, H₂S: 0 to 5,000 ppm, others on request
Designs for the detection of different gases possible:
SSM 6000 Classic (CH₄, H₂S), SSM 6000 Classic (CH₄, H₂S, O₂), SSM 6000 Classic (CH₄, H₂S, O₂, CO₂)
Wall construction
or table housing 19”/3 height units, sub-racks 84 partial units
Display and measured value displays:
4-digit LED display of measured values, status indicators for each reading, 4-digit illuminated LCD for each measured value
Power supply:
85 to 264 VAC / 47 to 63 Hz; Option: 115 VAC / 60 Hz
Analogue outputs:
4–20 mA (one output per measured component)
Digital outputs:
12 units / functions, such as status signals, limit alarms, configurable measuring point switching
Digital inputs:
4 units / functions
Data storage:
with history function of approximately 6,500 values; output via RS 232; also readable on the display
Interfaces:
RS 232, digital output of the measured values and program updates; Option: Profibus DP / CAN-bus
Further specifications
on request
Technical Details
Measuring ranges:
CH₄: 0 to 100 Vol.%, CO₂: 0 to 100 Vol.%, O₂: 0 to 25 Vol.%, H₂S: 0 to 5,000 ppm, others on request
Designs for the detection of different gases possible:
SSM 6000 Classic (CH₄, H₂S), SSM 6000 Classic (CH₄, H₂S, O₂), SSM 6000 Classic (CH₄, H₂S, O₂, CO₂)
Wall construction
or table housing 19”/3 height units, sub-racks 84 partial units
Display and measured value displays:
4-digit LED display of measured values, status indicators for each reading, 4-digit illuminated LCD for each measured value
Power supply:
85 to 264 VAC / 47 to 63 Hz; Option: 115 VAC / 60 Hz
Analogue outputs:
4–20 mA (one output per measured component)
Digital outputs:
12 units / functions, such as status signals, limit alarms, configurable measuring point switching
Digital inputs:
4 units / functions
Data storage:
with history function of approximately 6,500 values; output via RS 232; also readable on the display
Interfaces:
RS 232, digital output of the measured values and program updates; Option: Profibus DP / CAN-bus
Further specifications
on request